Raspberry Pi - Model B+ Enclosure (Black)

Raspberry Pi - Model B  Enclosure (Black)

Gabinete plástico negro para Raspberry Pi B+.


Peso: 0.036 Kg

Disponibilidad: Sin Stock

Su correo electrónico:

ARS 28941.00


El producto no está disponible para la venta en este momento


The Raspberry Pi Model B+ is THE new favorite of development platforms, so the last thing that you'd want is for something bad to happen to it. Why not protect it with one of these snazzy black plastic enclosures? These cases protect the B+ from things like rogue wires that might short it out while still allowing full access to the board as well as proper airflow to keep your new toy cool! Simply snap the RPi B+ into the bottom half of the enclosure, then snap the two sides together.

The enclosure provides slots to access the GPIO header, USB ports, Ethernet, microSD card, HMDI, 3.5mm jack, and CSI connectors as well as rubber feet and vents to ensure the board gets proper cooling and Pi Camera module mounting holes. All of the status LEDs on the Pi are visible through the case thanks to tunnel recesses embedded in the design and the two piece case can be taken apart without unplugging any cables. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!

Note: This case does NOT include a Raspberry Pi Model B+.

Dimensions: 93.4mm x 62.7mm x 31.1mm


Galería de Imágenes


Escribir Comentario

No hay comentarios aún.