Productos
Battery Cape
Provee de 5V para alimentar a BeagleBone a partir de 4 pilas AA.
COD: BBBATT01
Peso: 0.120 Kg
Disponibilidad: Sin Stock
ARS 88099.00
El producto no está disponible para la venta en este momento
Características
Descriptions
The BeagleBone Battery Cape provides a portable power solution for BeagleBone boards and its capes. This cape provides 5V power supply to the BeagleBone using 4 Lithium AA battery cells. Power will be provided to BeagleBone’s VDD_5V power rail as soon as battery cells are installed. The BeagleBone Battery Cape is also equipped with a power switch, a power indicator LED, and an EEPROM for muxing configuration.
Software Support & Compatibility
No software support is required by this board. All revisions are compatible with BeagleBone and BeagleBone Black.
Getting Started
Required Setup:
- A BeagleBone Battery Cape
- A BeagleBone
- 4 AA Lithium battery cells
Following the instructions below to start using your BeagleBone Battery Cape:
- Mount the Battery Cape on the BeagleBone.
- Install 4 AA Lithium battery cells to the battery holders. Each holder should only hold one cell.
-
As soon as battery cells are installed, the BeagleBone will power on.
- Note: Due to holder configuration, BeagleBone will power on as soon as two battery cells on one wing are installed. This is normal. You can keep installing battery cells on the other wing
- The Power LED on the Battery Cape and BeagleBone should be lit.
You can start using your BeagleBone.
Specifications
Followings are some specifications of the BeagleBone Battery Cape:
Electrical Specifications
Power | 3.0V via Lithium battery cells |
Holders | 4 AA battery holders |
Indicators | Power LED |
Connectors | Two 46-position connectors |
One 10-position connector |
Mechanical Specifications
Size | 3.55" x 3.40" |
Layers | 2 |
PCB Thickness | .062" |
RoHS Compliant | Yes |
Signal Usage
The BeagleBone Battery Cape uses 8 signals including:
- VDD_3V3EXP
- VDD_5V
- DGND
- PWR_BUT
- GPIO1_16
- I2C2_SCL
- I2C2_SDA
- AIN4